Rabbit anti-Human ZC3H14 Polyclonal Antibody

Beta LifeScience SKU/CAT #: BLC-00322A
Western Blot | Positive WB detected in: A549 whole cell lysate, 293T whole cell lysate, SH-SY5Y whole cell lysate | All lanes: ZC3H14 antibody at 3.9µg/ml | Secondary | Goat polyclonal to rabbit IgG at 1/50000 dilution | Predicted band size: 83, 66, 65, 81, 35, 33, 62, 67 kDa | Observed band size: 83 kDa
Western Blot | Positive WB detected in: A549 whole cell lysate, 293T whole cell lysate, SH-SY5Y whole cell lysate | All lanes: ZC3H14 antibody at 3.9µg/ml | Secondary | Goat polyclonal to rabbit IgG at 1/50000 dilution | Predicted band size: 83, 66, 65, 81, 35, 33, 62, 67 kDa | Observed band size: 83 kDa
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human colon cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human colon cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human cervical cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human cervical cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
Western Blot | Positive WB detected in: A549 whole cell lysate, 293T whole cell lysate, SH-SY5Y whole cell lysate | All lanes: ZC3H14 antibody at 3.9µg/ml | Secondary | Goat polyclonal to rabbit IgG at 1/50000 dilution | Predicted band size: 83, 66, 65, 81, 35, 33, 62, 67 kDa | Observed band size: 83 kDa
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human colon cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
IHC image of ZC3H14 Antibody diluted at 1:400 and staining in paraffin-embedded human cervical cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.

Rabbit anti-Human ZC3H14 Polyclonal Antibody

Beta LifeScience SKU/CAT #: BLC-00322A
Our products are highly customizable to meet your specific needs. You can choose options such as endotoxin removal, liquid or lyophilized forms, preferred tags, and the desired functional sequence range for proteins. Submitting a written inquiry expedites the quoting process.

Submit an inquiry today to inquire about all available size options and prices! Connect with us via the live chat in the bottom corner to receive immediate assistance.

Product Overview

Product Title Rabbit anti-Human ZC3H14 Polyclonal Antibody
Description The antibody against ZC3H14 was raised in rabbit using the Recombinant Human Zinc finger CCCH domain-containing protein 14 protein (176-306AA) as the immunogen. This antibody exists as a non-conjugated isotype IgG, purified by protein G with a purity greater than 95%. This antibody has been validated on ELISA, WB, IHC.
Uniprot Id - Alink Q6PJT7
Host Species Rabbit
Reactivity Human
Target Name ZC3H14
Target Synonyms FLJ11806 antibody; Mammalian suppressor of tau pathology-2 antibody; MGC26892 antibody; MSUT-2 antibody; Nuclear protein UKp68 antibody; NY REN 37 antibody; NYREN 37 antibody; Renal carcinoma antigen NY REN 37 antibody; Renal carcinoma antigen NY-REN-37 antibody; Renal carcinoma antigen NYREN 37 antibody; suppressor of tau 2, C. elegans, homolog of antibody; SUT2 antibody; UKp68 antibody; ZC3H14 antibody; ZC3HE_HUMAN antibody; Zinc finger CCCH domain-containing protein 14 antibody; Zinc finger CCCH type containing 14 antibody
Immunogen Description Recombinant Human Zinc finger CCCH domain-containing protein 14 protein (176-306AA)
Immunogen Species Human
Immunogen Sequence Complete sequences for the immunogen, target protein, and peptides are available upon request.
Conjugate Non-conjugated
Clonality Polyclonal
Isotype IgG
Purification Method >95%, Protein G purified
Buffer 0.03% Proclin 300Constituents: 50% Glycerol, 0.01M PBS, pH 7.4
Form Liquid
Application ELISA, WB, IHC
Storage Conditions Upon receipt, store at -20°C or -80°C. Avoid repeated freeze.

FAQs

Please fill out the Online Inquiry form located on the product page. Key product information has been pre-populated. You may also email your questions and inquiry requests to sales1@betalifesci.com. We will do our best to get back to you within 4 business hours.

Feel free to use the Chat function to initiate a live chat. Our customer representative can provide you with a quote immediately.

Proteins are sensitive to heat, and freeze-drying can preserve the activity of the majority of proteins. It improves protein stability, extends storage time, and reduces shipping costs. However, freeze-drying can also lead to the loss of the active portion of the protein and cause aggregation and denaturation issues. Nonetheless, these adverse effects can be minimized by incorporating protective agents such as stabilizers, additives, and excipients, and by carefully controlling various lyophilization conditions.

Commonly used protectant include saccharides, polyols, polymers, surfactants, some proteins and amino acids etc. We usually add 8% (mass ratio by volume) of trehalose and mannitol as lyoprotectant. Trehalose can significantly prevent the alter of the protein secondary structure, the extension and aggregation of proteins during freeze-drying process; mannitol is also a universal applied protectant and fillers, which can reduce the aggregation of certain proteins after lyophilization.

Our protein products do not contain carrier protein or other additives (such as bovine serum albumin (BSA), human serum albumin (HSA) and sucrose, etc., and when lyophilized with the solution with the lowest salt content, they often cannot form A white grid structure, but a small amount of protein is deposited in the tube during the freeze-drying process, forming a thin or invisible transparent protein layer.

Reminder: Before opening the tube cap, we recommend that you quickly centrifuge for 20-30 seconds in a small centrifuge, so that the protein attached to the tube cap or the tube wall can be aggregated at the bottom of the tube. Our quality control procedures ensure that each tube contains the correct amount of protein, and although sometimes you can't see the protein powder, the amount of protein in the tube is still very precise.

To learn more about how to properly dissolve the lyophilized recombinant protein, please visit Lyophilization FAQs.

More from Back to School. Back to Lab. Ready for Results. - Advance Your Research with Beta LifeScience
Western Blot | Positive WB detected in: MCF-7 whole cell lysate, A549 whole cell lysate, Mouse thymus | All lanes: ACAA2 antibody at 1:2000 | Secondary | Goat polyclonal to rabbit IgG at 1/50000 dilution | Predicted band size: 42 kDa | Observed band size: 42 kDa
IHC image of ACAA2 Recombinant Monoclonal Antibody diluted at 1:100 and staining in paraffin-embedded human colon cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a Goat anti-rabbit polymer IgG labeled by HRP and visualized using 0.05% DAB.
ACAA2 Recombinant Monoclonal Antibody
CAT#: BLC-06609A
IHC image of the antibody diluted at 1:100 and staining in paraffin-embedded human breast cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a Goat anti-rabbit polymer IgG labeled by HRP and visualized using 0.07% DAB.
IHC image of Acetyl-HIST1H3A(K18) Recombinant Monoclonal Antibody diluted at 1:100 and staining in paraffin-embedded human gastric cancer performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4°C overnight. The primary is detected by a Goat anti-rabbit polymer IgG labeled by HRP and visualized using 0.07% DAB.
Acetyl-HIST1H3A(K18) Recombinant Monoclonal Antibody
CAT#: BLC-06595A
Western BlotPositive WB detected in:293 whole cell lysate, HepG2 whole cell lysate, Mouse kidney tissueAll lanes:Acetyl-Histone H4 (K16) antibody at 1.65μg/mlSecondaryGoat polyclonal to rabbit IgG at 1/50000 dilutionPredicted band size: 11 KDaObserved band size: 11 KDa
Immunocytochemistry analysis of Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody diluted at 1:100 and staining in Hela cells performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4℃ overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody
CAT#: BLC-06518A
Western BlotPositive WB detected in:293 whole cell lysate, HepG2 whole cell lysate, Mouse kidney tissueAll lanes:Acetyl-Histone H4 (K16) antibody at 1.65μg/mlSecondaryGoat polyclonal to rabbit IgG at 1/50000 dilutionPredicted band size: 11 KDaObserved band size: 11 KDa
Immunocytochemistry analysis of Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody diluted at 1:100 and staining in Hela cells performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4℃ overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody
CAT#: BLC-06519A
Western BlotPositive WB detected in:293 whole cell lysate, HepG2 whole cell lysate, Mouse kidney tissueAll lanes:Acetyl-Histone H4 (K16) antibody at 1.65μg/mlSecondaryGoat polyclonal to rabbit IgG at 1/50000 dilutionPredicted band size: 11 KDaObserved band size: 11 KDa
Immunocytochemistry analysis of Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody diluted at 1:100 and staining in Hela cells performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4℃ overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
Acetyl-Histone H4 (K16) Recombinant Monoclonal Antibody
CAT#: BLC-06520A
Western Blot | Positive WB detected in Hela whole cell lysate, MCF-7 whole cell lysate, 293 whole cell lysate, HepG2 whole cell lysate | All lanes Acetyl-Histone H4 (K5) antibody at 1.05μg/ml | Secondary | Goat polyclonal to rabbit IgG at 1/50000 dilution | Predicted band size: 11 KDa | Observed band size: 11 KDa
Immunocytochemistry analysis of Acetyl-Histone H4 (K5) Recombinant Monoclonal Antibody diluted at 1:100 and staining in Hela cells performed on a Leica BondTM system. After dewaxing and hydration, antigen retrieval was mediated by high pressure in a citrate buffer (pH 6.0). Section was blocked with 10% normal goat serum 30min at RT. Then primary antibody (1% BSA) was incubated at 4℃ overnight. The primary is detected by a biotinylated secondary antibody and visualized using an HRP conjugated SP system.
Acetyl-Histone H4 (K5) Recombinant Monoclonal Antibody
CAT#: BLC-06516A
Recently viewed